Your current location: Home > news > Trade plan

Import container transport goods strategy

Publisher: Wuxi Konid Import and Export Trading Co., Ltd. release time:2020-6-19 11:06:22 The number of clicks:100 shut down
一、Reasonable distribution of weight
According to the volume of the goods, weight, strength of the outer packing, and the nature of the goods, the goods with strong outer packing and heavy weight should be packed in the following, the weight of the goods should be evenly distributed on the bottom of the box when loading. Otherwise, it may cause the bottom to fall off or the bottom beam to bend. If the center of gravity of the entire container is shifted, it may cause the container to tilt when it is lifted with claw tools.
Necessary gaskets for the goods
When loading the goods, the necessary padding should be determined according to the strength of the packing. For the outer packing of fragile goods, fragile goods should be sandwiched with buffer material to prevent the goods from collision and extrusion. To fill the gap between the goods and between the goods and the side walls of the container, it is necessary to insert spacers, coverings and other spacers between the goods.
Reasonable fixation of goods
After the goods are packed, there is usually a gap. Due to the existence of voids, the cargo in the container must be fixed to prevent the cargo collapse and damage caused by the rocking hull in transit, especially by sea.
1. Support the goods with square wooden strips and other supports during packing.
2. If there is a gap between the side walls of the cargo or container, some square wood can be used for horizontal reinforcement. In addition, articles such as stuffing, cushion or wedge can also be inserted to prevent the displacement of the cargo during transportation.
3. Use rope, belt and other rigging or appliances to bind and reinforce the goods to ensure that the goods will not be damaged due to the movement of the truck.
Reasonable mix of goods
In order to ensure the safety of container goods in the process of transportation, on the one hand, we must do a good job of reinforcement, on the other hand, we must pay special attention to the arrangement of goods. Some mixed shipments which may cause deterioration or damage to the goods should be avoided. The specific situation is as follows:
1. Dry goods should not be mixed with wet goods during transportation, mainly to avoid dampness and mildew. In addition, in practice, if the goods have a high requirement for dryness, it is necessary to add appropriate desiccant or use other drying methods.
2. Normal goods should not be mixed with goods with strong odors or other pungent smells to prevent the quality of products from being affected by odor.
3. Any goods should not be mixed with powdered goods as far as possible. Powdered goods are not stable enough in the transportation process and are very likely to explode.
4, dangerous goods should never be mixed, mainly because the performance of all kinds of dangerous goods are different, and their various rescue measures are different, if mixed, many may cause secondary danger.
5, different packages of goods can not be mixed, must be separately loaded, to facilitate the usual transport